您的位置: 首页 > 国外标准 > 美国材料与试验协会ASTM >  ASTM A240/A240M-2011  一般用途用压力容器用铬不锈钢和铬-镍不锈钢厚钢板,薄钢板和带材的标准规格
 

ASTM A240/A240M-2011  一般用途用压力容器用铬不锈钢和铬-镍不锈钢厚钢板,薄钢板和带材的标准规格

标准编号:ASTM A240/A240M-2011
分享到:

中文标准名称:一般用途用压力容器用铬不锈钢和铬-镍不锈钢厚钢板,薄钢板和带材的标准规格
英文标准名称:standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications
标准状态:已作废
代替标准号:ASTM A240/A240M-2010b
被代替标准号:ASTM A240/A240M-2011a
废止时间:2011-04-01
语言:英文版,中文版
发布日期:2011-02-15
实施日期:2011-02-15
标准类别:美国材料与试验协会ASTM
中国标准文献分类法(中标分类CCS):冶金 >> 钢铁产品 >> 钢板、钢带
国际标准分类法(ICS):冶金 >> 钢铁产品 >> 承压钢
标准页数:13
标准简介:

1.1 This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 This specification is expressed in both inch-pound and SI units. However, unless the order specifies the applicable x201C;Mx201D; specification designation (SI units), the material shall be furnished in inch-pound units.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

文件格式:纸质版或者PDF电子版(用Acrobat Reader打开)或Word版本doc格式
PDF格式 ASTM A240/A240M-2011 一般用途用压力容器用铬不锈钢和铬-镍不锈钢厚钢板,薄钢板和带材的标准规格 免费下载 Word格式 ASTM A240/A240M-2011 一般用途用压力容器用铬不锈钢和铬-镍不锈钢厚钢板,薄钢板和带材的标准规格 免费下载免费标准下载
文件大小: KB
添加时间:2012/11/23
 
本类标准下载排行
 
 
本类最新免费标准
 
友情链接:苹果游戏|华东在线
免费标准下载网 |标准分享网 |联系我们
版权所有:www.ZBGB.org