您的位置: 首页 > 国外标准 > 欧盟标准EN >  EN 378-2-2008  制冷系统和热泵.安全性和环境要求.第2部分:设计、结构、试验、标记和文献
 

EN 378-2-2008  制冷系统和热泵.安全性和环境要求.第2部分:设计、结构、试验、标记和文献

标准编号:EN 378-2-2008
分享到:

中文标准名称:制冷系统和热泵.安全性和环境要求.第2部分:设计、结构、试验、标记和文献
英文标准名称:refrigerating systems and heat pumps - safety and environmental requirements - part 2: design, construction, testing, marking and documentation
标准状态:现行有效
代替标准号:PREN 378-2:2003
采用国际标准编号:I.S. EN 378-2-2008 Identical
BS EN 378-2-2008+A2-2012 Identical
DIN EN 378-2 (2008-06
语言:英文版, 中文版
发布日期:2008-02-01
实施日期:2008-02-01
标准类别:欧盟标准EN
中国标准文献分类法(中标分类CCS):能源和热传导工程 >> 制冷技术
标准页数:68
标准目录:Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, designations, classification and 
 abbreviations
4 Significant hazards
5 Safety requirements and/or measures
6 Requirements for assemblies
Annex A (normative) - Additional requirements for refrigerating 
 systems and heat pumps with R717
Annex B (normative) - Determination of category for assemblies
Annex C (normative) - Requirements for intrinsic safety test
Annex D (normative) - List of significant hazards
Annex E (informative) - Assessment of assemblies for compliance 
 with directive 97/23/EC
Annex F (informative) - Examples for arrangement of pressure 
 relief devices in refrigerating systems
Annex G (informative) - Checklist for external visual 
 inspection of the installation
Annex ZA (informative) - Relationship between this European 
 Standard and the Essential Requirements of EU 
 Directive 97/23/EC
Annex ZB (informative) - Relationship between this European 
 Standard and the Essential Requirements of EU 
 Directive 98/37/EC
Annex ZC (informative) - Relationship between this European 
 Standard and the Essential Requirements of EU 
 Directive 2006/42/EC
Bibliography
标准简介:This European Standard is applicable to the design, construction and installing of refrigerating systems including piping, components and materials and including ancillary equipment directly associated with such systems. It also specifies requirements for testing, commissioning, marking and documentation. In case the heat transfer fluid is not gaseous at atmospheric pressure, the requirements for circuits for heat transfer fluids are excluded except for any safety devices associated with the refrigerating system. It is not applicable to refrigerating systems with air or water as refrigerant and does not cover the requirements for equipment to be used in a potentially explosive atmosphere. The following ancillary equipment includes: ? fan and fan motor; ? electrical motor and transmission for open compressor systems. This European Standard specifies the requirements relating to stationary and mobile refrigerating systems of all sizes, including heat pumps. Systems using refrigerants other than those listed in Annex E of EN 378-1:2008 are not covered by this standard as long as a safety class is not assigned. Basic safety requirements for refrigerating systems as defined in EN 378-1 are applicable for this standard. Basic requirements for the installation site as defined in EN 378-3 apply. This European Standard is not applicable to refrigeration systems and heat pumps which are manufactured before the date of its publication as EN.
文件格式:纸质版或者PDF电子版(用Acrobat Reader打开)或Word版本doc格式
PDF格式 EN 378-2-2008 制冷系统和热泵.安全性和环境要求.第2部分:设计、结构、试验、标记和文献 免费下载 Word格式 EN 378-2-2008 制冷系统和热泵.安全性和环境要求.第2部分:设计、结构、试验、标记和文献 免费下载免费标准下载
文件大小: KB
添加时间:2012/11/23
 
相关免费标准
 
 
本类标准下载排行
 
 
本类最新免费标准
 
免费标准下载网 |标准分享网 |联系我们
版权所有:www.ZBGB.org